Set up your first tracking network
Coverage comes first. A tag only appears on the map once something is listening for it, so this guide gets a hotspot online and reporting. Adding tags comes next, in Add your first tag.
What you need
- An account. Sign up for Blecon Track. Your workspace is ready to go with a network already linked.
- Hotspots. The receivers that detect your tags. The Blecon Agent turns a phone, tablet or laptop into one, or you can use hubs.
- Tags. Whatever you want to attach to your assets. See Supported tags.
Don't have hardware yet? An evaluation kit ships tags and a hotspot together, and its quickstart takes you through the same steps with known-good parts.
Step 1: Open your workspace
- Go to Blecon Track and sign in.
- Select your workspace. Everything you create (tags, zones, rules) lives inside it.
Step 2: Get a hotspot online
Pick whichever you have to hand. You can add more later, and mix both.
Using a phone or tablet:
- Install the Blecon Agent and sign in with your Blecon account.
- Leave it running. The Agent works in the background, scanning for nearby tags and relaying what it hears.
Using a hub:
- Power it on and connect it to your network, following the instructions for your hub.
Step 3: Check it is reporting
- Go to Network in Blecon Track.
- For a hub, select Hubs and add it. It shows as online once it has reported in. A new hub can take a few minutes to first appear.
- For a phone or tablet, open the Devices page. The Agent registers itself, so there is nothing to add under Hubs.
If it never shows up, check that it has power and connectivity, and that the Agent is signed in to the same account as your workspace.
What you have now
Coverage. Anything in range of that hotspot can be tracked, without installing infrastructure.
Next: Add your first tag.